What problems might occur during the weaving process of plastic woven bag equipment?

The production of plastic woven bags by manufacturers involves a crucial step: the mixing of raw materials. This process directly impacts the quality of the product and is therefore understandable. What problems might arise during the weaving process of plastic woven bag equipment? Today, Yangxin Xindeli Packaging Machinery Factory will explain.

First, methods for repairing and splicing woven bags.

Good geotextiles possess resistance to environmental stress cracking, and woven bags are excellent materials for seepage prevention, corrosion prevention, leakage prevention, and moisture prevention, with a promising market prospect. The resilience of geotextiles reflects their ability to absorb impact energy, which can be approximately measured as the product of the material's tensile strength and elongation.

Woven bags with good temperature resistance to asphalt mixtures have a heat resistance of up to 150 degrees Celsius. At temperatures below this, geotextiles not only do not melt or soften, but also require further repair and maintenance. Repair and maintenance should be performed again, including stitching the joints of the geotextile and ensuring the tabs are closed at the end of the year. In all areas except rock slopes, holes or tears in the bags should be patched with the same material.

Secondly, the packaging and storage methods for woven bags as described by the plastic woven bag manufacturers.

Plastic woven bag manufacturers ensure quality through accurate packaging and storage methods for their finished plastic bags during production.

When packaging, it is necessary to separate bags of different sizes, such as type, model and specifications, bag name, product name, specifications, quantity, specification code and date, starting with 00, starting with 500. Each bag should be labeled and packaged flat to prevent wrinkles. Ideally, it should be stored in a cool, dry place away from fire, heat, and direct sunlight, and cleaned indoors.

Third, methods to improve the flatness of plastic woven bags

The request is not only about the quality of raw materials but also about the production quality. If, for example, a wide-width machine is used, and speed regulation and four shifts are implemented, contact should not be made to ensure weft balance. This synchronization of the drawing machine, such as for the warp yarns, requires the mechanical speed to match the received fabric structure power from the engine and electrical system to improve the number of teeth on the balancing gears, and to strengthen the tension belt and smooth the fabric shaft from the motor. The main improvement is in the circular loom springs, increasing their elasticity, ensuring stable cam and four-card pressure, preventing wire twisting, and making the weaving process smoother.